Precor EFX546 Manual de Serviço descarregar pdf (Página 101)

C546 Elliptical Fitness Crosstrainerl

Page 101

Procedure 7.27 - Replacing the Center Handrail Frame Tube

(version 1, 2))

1. Set the on/off switch in the “off” position, then unplug the power cord from the wall outlet.

2. Loosen the screws that fasten the upper end of the handrails into the upper handrail clamp.

3. Loosen the four set screws that fasten the lower end of the handrails into the frame tubes.

4. Slide the upper end of one of the handrails out of the upper handrail clamp and then slide

the lower end of the handrail off of the frame tube. Repeat this step for the other handrail.

5. Remove the screws that secure the interconnect cable cover to the bottom of the display

backing plate. Remove the interconnect cover cable. See Diagram 7.4.

6. Remove the screws that secure the reading rack to the to the display backing plate. Remove

the reading rack.

7. Remove the screws that secure the display housing to the display backing plate.

8. Disconnect the interconnect cable from the upper PCA.

9. Remove the display assembly.

10. Remove the screws that fasten the upper handrail clamp to the center handrail frame tube.

Remove the upper handrail clamp.

11. Have an assistant support the center handrail frame tube as you remove the four screws

that fasten the center handrail frame tube clamp. Remove the two halves of the clamp

taking care not to lose the pin in the rear half of the clamp. (See Diagram 7.23)

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 117 118

Sem comentários

Precor EFX546 Manual de Serviço Página 101