Precor 9.41si Manual de Serviço descarregar pdf (Página 26)

9.41S, 9.41Si Treadmill

Page 26

Procedure 6.3 - Replacing the Lift Platform

WARNING

Always turn off the circuit breaker and unplug the treadmill before you remove the treadmill hood.

Removing the Lift Platform

1. Remove the hood.

Note:

To avoid scratching or marring the treadmill, put a drop cloth underneath the treadmill when you

perform Step 2.

2. Place the treadmill on its left side.

3. Remove the screw and nut that secure the lift tube to the lift platform.

Note:

It is not necessary to remove the lift motor when you remove the lift platform.

4. Remove the screws and nuts that secure the lift platform to the treadmill frame.

5. Remove the wheels from the lift platform. Mount the wheels on the new lift platform.

Replacing the Lift Platform

6. With the treadmill still on its left side, position the lift platform at its mounting position.

7. Replace the screws and nuts that secure the lift platform to the treadmill frame.

8. Replace the screw and nut that secure the lift tube to the lift platform.

9. Return the treadmill to an upright position.

10. Check the operation of the treadmill as described in Section Three of this appendix, then

replace the hood.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Sem comentários

Precor 9.41si Manual de Serviço Página 26