Precor EFX546 Manual de Serviço descarregar pdf (Página 38)

C546 Self Powered Elliptical Fitness Crosstrainer

Page 38

Replacing the Lower Interconnect Cable

11. Remove the rear cover per Procedure 7.19. Disconnect the interconnect cable from the

lower PCA (connector J2). See Diagram 7.3.

12. The upper and lower interconnect cables are connected at the mid-point of the main

column. Remove the mid-point column cover per Procedure 7.1.

13. Disconnect the lower interconnect cable from the mid-point connector. See Diagram 6.2.

Tape the replacement interconnect cable to the old interconnect cable at the lower PCA end

of the old interconnect cable.

14. Carefully pull the old interconnect cable out of the mid-point access hole while feeding the

new interconnect cable into the unit. When the new cable is fully into the unit, remove the

tape and discard the old interconnect cable. Connect the lower interconnect cable to the

mid-point connector and push them into the access hole.

15. Connect the new interconnect cable to the lower PCA.

16. Reconnect the red lead battery lead removed in step 1 and replace the rear cover.

17. Check the operation of the EFX as described in Section Four.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 65 66

Sem comentários

Precor EFX546 Manual de Serviço Página 38